User`s guide

SNMP Traps Screen

6E123-50 and 6E133-49 User’s Guide 5-59

5.17 SNMP TRAPS SCREEN

Since the 6E123-50 and 6E133-49 are SNMP compliant devices, they can

send messages to multiple Network Management Stations to alert users of

status changes. The SNMP Traps screen is shown in Figure 5-23.

Access the SNMP Traps screen from the Module Conﬁguration Menu

screen by using the arrow keys to highlight the SNMP TRAPS ﬁeld and

pressing ENTER. The SNMP Traps screen displays.

Figure 5-23 SNMP Traps Screen

The following explains each ﬁeld of the SNMP Traps screen.

Trap Destination (Modiﬁable)

Indicates the IP address of the workstation to receive trap alarms. Up to

eight different destinations can be deﬁned.

NOTE

It is only necessary to assign SNMP traps if the user desires

the traps to be sent to different addresses than those assigned

in Section 5.9, which details how to set SNMP Traps for the

6C105 chassis.

Firmware Revision: XX.XX.XX

SNMP Traps

2269_17

BOOTPROM Revision: XX.XX.XX

Trap Community Name

public

Module Type: 6E123-50

Slot Number:

6E123-50 LOCAL MANAGEMENT

Event Message Line

RETURNSAVE

Trap Destination

0.0.0.0

Enable Traps

[NO]

EXIT