User`s guide

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
FDDI Dual-Attached Intelligent Module User’s Guide Page 4-17
• The LEM_Reject_Ct of the associated PHY.
[
snmpFddiPORTLemRejectCt]
• The value of the PHY’s
LER_Cutoff. [snmpFddiPORTLerCutoff]
• The value of the PHY’s
LER_Alarm. [snmpFddiPORTLerAlarm]
• The PHY’s current connection state. [
snmpFddiPORTConnectState]
• The current state of the PHY’s PCM state machine.
[snmpFddiPORTPCMState]
• The value of the PHY’s
PC_Withhold. This is always none (1).
[
snmpFddiPORTPCWithhold]
4.2.5.2 SMT Version 7.3
• The total number of PHYs possible (across all FDDI ports) on this
unit. [
fddimibPORTNumber]
• The value of the PORT’s
PC_Type. [fddimibPORTMyType]
• The type of the remote PORT as determined in PCM.
[fddimibPORTNeighborType]
• A value representing the PORT’s connection policies desired in the
node. [fddimibPORTConnectionPolicies]
• The indications (
T_Val (9), R_Val (9) in PC-Signalling, of the intent
to place a MAC in the output token path to a PORT.
[
fddimibPORTIndicated]
• Indicates the Path(s) into which this PORT is currently inserted.
[fddimibPORTCurrentPath]
• This variable is a list of permitted Paths where each list element
defines the PORT’s permitted Paths. [fddimibPORTRequestedPaths]
• Indicates the MAC, if any, whose transmit path exits the station via this
PORT. [fddimibPORTMACPlacement]
• Indicates the Paths which are available to this PORT.
[fddimibPORTAvailablePaths]
• This variable indicates the type of PMD entity associated with this
PORT. [fddimibPORTPMDClass]