User`s guide

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
Page 4-10 FDDI Dual-Attached Intelligent Module User’s Guide
• The highest version of SMT that this station supports.
[
fddimibSMTHiVersionId]
• The lowest version of SMT that this station supports.
[fddimibSMTLoVersionId]
• This variable contains 32 octets of user defined information.
[fddimibSMTUserData]
• The version of the FDDI MIB of this station.
[fddimibSMTMIBVersionId]
• The number of MACs in this station or concentrator.
[fddimibSMTMACCts]
• The value of this variable is the number of A, B, and S ports in this
station or concentrator. [fddimibSMTNonMasterCts]
• The number of M ports in a node. [
fddimibSMTMasterCts]
• A value that indicates the path types available in the station.
[fddimibSMTAvailablePaths]
• A value that indicates the configuration capabilities of a node.
[fddimibSMTConfigCapabilities]
• A value that indicates the configuration policies currently desired in a
node. [fddimibSMTConfigPolicy]
• The connection restrictions that are currently being enforced by the
port. [fddimibSMTConnectionPolicy]
• The timer, expressed in seconds, used in the Neighbor Notification
protocol. [fddimibSMTTNotify]
• Indicates whether the node will generate Status Reporting Frames for
its implemented events and conditions. [fddimibSMTStatRptPolicy]
• Reference
Trace_Max maximum propagation time for a trace on an
FDDI topology. [
fddimibSMTTraceMaxExpiration]
• A flag indicating if the station has a bypass on its A/B port pair.
[
fddimibSMTBypassPresent]
• Indicates the current state of the ECM state machine.
[fddimibSMTECMState]