User`s guide
Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
FDDI Dual-Attached Intelligent Module User’s Guide Page 4-5
4.2.1 Module Status and Statistics
The status and statistics described in this section are applicable to an I/O
module:
• Whether the module’s temperature is too hot. [hwTempOK]
• Results of diagnostics, when diagnostics were last performed on the
module (usually power-up). Possible values: diagnostics failed,
diagnostics still running, diagnostics passed. Status code for the
diagnostics that were last run on the module. [
hwDiagCode]
• Whether the module is currently executing its operational software.
[hwInuse]
• The manufacturing information for this module which includes part
number, hardware revision level, and serial number. [hwManufData]
4.2.2 Port Status and Statistics
The status and statistics described in this section are applicable to any
port.
4.2.2.1 General Port Status and Statistics
• The time, in centi-seconds (hundredth of a second), the port entered its
last state shown in the port, which will be one of the following:
-UP
The port can send/receive NMS packets; however, whether or not
the port has its bridging and/or routing functions enabled is not
indicated.
[
ifOperStatus = 1]
-DOWN
The port is broken, or is intentionally physically disabled
[
ifOperStatus = 2]
- TESTING
The port is in local loopback [ifOperStatus = 3]
• The port type, which would be FDDI