Specifications

Corrected and Known Anomalies
Event Configuration Manager (ECM)
Software Release Notes Page 88
Event Configuration Manager (ECM)
Known ECM Anomalies in SPECTRUM 6.0
Problem 1: The Enterprise Configuration Manager (ECM) cannot use
External List-typed Attributes that have OID References within
configurations. If you create or capture a configuration in ECM you receive
the error message, “No instance exists.” for any External List-type
Attributes that have an OID Reference.
Solution: Use the Model Type Editor to create an identical Attribute to the
one you need to use in configurations, but not make it List-type. Then use
that new Attribute in configurations to access and set the value on the
device. This problem will be corrected in a future release of SPECTRUM.
Problem 2: When switching between specific, and shared configuration
modes and vice versa, the Configuration window may not show an
expanded list.
Solution: In the Configuration window, click the specific/desired mode
under the View menu. The list of configurations will be appropriately
refreshed. This problem will be corrected in a future release of SPECTRUM.
Problem 3: The Detail Result windows of Load, Capture, or Verify, do not
show friendly strings for enum attributes. This is the same for the ecmbg
log.
Solution: This problem will be corrected in a future release of
SPECTRUM.