Specifications

Application Views
Device Management Page 70 SmartSwitch 2000
Table 22 lists the application-specific subviews
available from the Icon Subviews menu for the
ATM Client application:
ATM Client Application VCL View
This view provides a table containing detailed
information about the virtual channels passing
through this application. The ATM Client
Application Virtual Channel Link view provides
the following information.
Admin Status
This object is implemented only for a VCL that
terminates a VCC (i.e., one that is not cross-
connected to other VCLs). Its value specifies the
desired administrative state of the VCL. The Up
state indicates that the traffic flow for this VCL is
enabled. The Down state indicates that the traffic
flow for this VCL is disabled.
Oper Status
This object shows the current operational status
of the VCL. The Up and Down states indicate that
the VCL is currently operational or not
operational, respectively. The Unknown state
indicates that the status of this VCL cannot be
determined.
Last Change
This is the value of the MIB II’s sysUpTime object
at the time the VCL entered its current
Table 22: ATM Client Application Subviews menu
ATM Client Application Subviews menuATM Client Application Subviews menu
ATM Client Application Subviews menu
Menu Selection Description
Configuration Opens the Device Configuration view described in
Configuration Views.
Model Information Opens the Model Information view described in the
Operator’s Reference.
VCL Table Opens the ATM Client Application VCL (Virtual Channel Link)
Table view described later in this section.
Interfaces Opens the Interfaces view described later in this section.