Specifications

Application Views Fast Ethernet Application
Device Management Page 63 SmartSwitch 2000
Fast Ethernet Application
The name of the model type used to model the
application is FastEnetApp. The application
provides the Fast Ethernet Port Table and Fast
Ethernet Configuration view, which allow you to
configure ports for Ethernet or Fast Ethernet
transmission or use Auto-Negotiation to
determine transmission mode.
Fast Ethernet Port Table
Access this table as follows:
1 Highlight the FastEnetApp icon (Icon mode) or
text label (List mode).
2 From the View menu, select Icon Subviews ->
Icon Subviews -> Icon Subviews ->
Icon Subviews ->
Control Table
Control TableControl Table
Control Table.
The Fast Ethernet Port Table provides the
following information:
Interface
The interface number to which this Fast Ethernet
information applies.
Port Group
The port group number to which this Fast
Ethernet information applies.
Port
The physical port number to which this Fast
Ethernet information applies.
Operational Mode
The current operational mode of this port.
Fast Ethernet Configuration View
This view (Figure 16) allows you to configure ports
for Ethernet or Fast Ethernet transmission or to
use Auto-Negotiation in determining transmission
mode. Open this view by double-clicking any
entry in the Fast Ethernet Port Table. The Fast
Ethernet Configuration view carries the Interface,
Port Group, and Port information over from the
Port Table.