Specifications

Application Views Interface Remap Application
Device Management Page 60 SmartSwitch 2000
Interface Remap Application
The name of the model type used to model the
application is CtIfRemapApp. The application
provides the ability to map one or more interfaces
to another interface. A map is defined by creating
a row in the Interface Remap Table (described
below) to specify the source and destination
interfaces. When a source interface is remapped
to a destination interface, the destination
interface transmits all packets received or
transmitted on the source interface. Counters on
the destination interface increment for all packets
transmitted by normal bridging or due to the
interface remap. Figure 15 shows a view of the
Interface Remap Table.
Access the Interface Remap Table as follows:
1 Highlight the CtIfRemapApp icon (Icon mode)
or text label (List mode).
2 From the View menu, select Icon Subviews ->
Icon Subviews -> Icon Subviews ->
Icon Subviews ->
Port Remap
Port RemapPort Remap
Port Remap.
The Interface Remap Table provides the following
information:
Number Entries
The number of active entries in the Interface
Remap Table.
Physical Errors Enable
Physical error remapping can be Enabled,
Disabled, or Unsupported. Unsupported indicates
that the device is incapable of remapping physical
errors.
Max Number Entries
The maximum number of entries allowed in the
Interface Remap Table.
Used to sort the Interface Remap Table.
Used to search the Interface Remap Table for a
specific interface.
Used to update the Interface Remap Table.
Source Port
The source interface that will have packets
redirected to the destination interface as defined
by Destination
DestinationDestination
Destination.
Destination
The interface that will see all packets redirected
from Source Port
Source PortSource Port
Source Port.
Sort
Find
Update