Specifications

Event and Alarm Messages
Device Management Page 53 SmartSwitch 2000
CsEvFormat/Event000d01a1
{d “%w- %d %m-, %Y - %T”} - A Port
Interface Module has been removed
from port {I 3} of interface {I 1} on {m}
({t}). (event [{e}])
CsPCause/Prob000d01a1
A Port Interface Module has been physically
removed.
CsEvFormat/Event000d01a2
{d “%w- %d %m-, %Y - %T”} -
Network configuration change
reported by {m} ({t}). Device linked to
port {I 3} on interface {I 1}. (event
[{e}])
CsPCause/Prob000d01a2
A device supporting link integrity, fiber optic or
twisted pair, has made a valid connection (link)
to this port.
CsEvFormat/Event000d01a3
{d “%w- %d %m-, %Y - %T”} - Port {I
3} on interface {I 1} of {m} ({t}), has
unsegmented. (event [{e}]).
CsPCause/Prob000d01a3
A device previously linked with this port has
been removed, powered down, or the cable
segment has a fault.
CsEvFormat/Event000d0351
{d “%w- %d %m-, %Y - %T”} - Front
panel redundant port {I 1} has been
activated by device {m} of type {t}.
(event [{e}])
CsPCause/Prob000d035
CsPCause/Prob000d035CsPCause/Prob000d035
CsPCause/Prob000d0351
A new port has been activated for the front
panel redundant circuit. This does NOT
indicate this port is usable, but is being tested.
Table 16: SmartSwitch Module Events and Alarms (Continued)
SmartSwitch Module Events and Alarms (Continued)SmartSwitch Module Events and Alarms (Continued)
SmartSwitch Module Events and Alarms (Continued)
Message in the Event Log Alarm Manager Probable Cause Message