Specifications

Event and Alarm Messages
Device Management Page 52 SmartSwitch 2000
CsEvFormat/Event00010308
{d “%w- %d %m-, %Y - %T”} - A(n) {t}
device, named {m}, has detected a
communication Link Down. (event
[{e}])
CsPCause/Prob00010308
Communication link is down.
CsEvFormat/Event00010309
{d “%w- %d %m-, %Y - %T”} - A(n) {t}
device, named {m}, has detected a
communication Link Up. (event [{e}])
No probable cause message
CsEvFormat/Event0001030a
{d “%w- %d %m-, %Y - %T”} - A(n) {t}
device, named {m}, has detected an
Authentication Failure. (event [{e}])
CsPCause/Prob0001030a
Authorization failure. Other user is trying to
connect to device with an invalid community
string.
CsEvFormat/Event0001030
CsEvFormat/Event0001030CsEvFormat/Event0001030
CsEvFormat/Event0001030b
{d “%w- %d %m-, %Y - %T”} - A(n) {t}
device, named {m}, has detected an
EGP Neighbor Loss. EGP Neighbor IP
address is {0 1}. (event [{e}])
CsPCause/Prob0001030b
Lost contact with EGP neighbor.
CsEvFormat/Event000d01a0
{d “%w- %d %m-, %Y - %T”} - A Port
Interface Module has been inserted
into port {I 3} of interface {I 1} on {m}
({t}). (event [{e}]).
CsPCause/Prob000d01a0
A Port Interface Module has been physically
inserted.
Table 16: SmartSwitch Module Events and Alarms (Continued)
SmartSwitch Module Events and Alarms (Continued)SmartSwitch Module Events and Alarms (Continued)
SmartSwitch Module Events and Alarms (Continued)
Message in the Event Log Alarm Manager Probable Cause Message