Specifications

Configuration Views Port Configuration View
Device Management Page 48 SmartSwitch 2000
MAC Count
The number of MACs supported by this station.
The number of non-master ports on this station.
Master Ports
The number of master ports on this station.
SMT Information
This section of the FddiMAC Device Configuration
view provides the following configuration
information on the FDDI SMT:
SMT Version
The version of Station Management (SMT)
running.
OBS Present
Indicates whether an Optical Bypass Switch
(OBS) is connected.
T-Notify (sec)
The timer value, in seconds, used in Neighbor
Notification Protocol. The allowed range is from 2
to 30 seconds.
T-Req (milli sec)
The Target Token Rotation Time (TTRT) bid, in
milliseconds, made by this concentrator.
T-Neg (milli sec)
The winning TTRT bid, in milliseconds, on the
ring.
TVX (milli sec)
The valid transmission time, in milliseconds.
Port Configuration View
The Port Configuration view provides information
on the configuration and operating status of the
ports. To access this view, do the following:
1 Highlight the Logical Port icon in the Chassis
Device view.
2 From the View menu, select Icon Subviews ->
Icon Subviews -> Icon Subviews ->
Icon Subviews ->
Port Configuration View
Port Configuration ViewPort Configuration View
Port Configuration View.
The Port Management section of the FDDI Port
Configuration view provides the following
information:
Port Action
Allows you to enable/disable the port. The state
returns to “Other” once the port has been
Enabled/Disabled.
Port State
The status of this port. Possible states are
disabled, connecting, standby, and active.