Specifications

Configuration Views
Device Management Page 46 SmartSwitch 2000
MAC Configuration
The actual configuration of the station. Table 15 lists
the possible configurations and their descriptions.
Table 14: FDDI Ring States
FDDI Ring StatesFDDI Ring States
FDDI Ring States
Ring States Description
Isolated The concentrator is not attached to the ring.
Non-Op The concentrator is attempting to enter the ring.
Ring-Op The ring is operational.
Detect The claim/beacon process of the FDDI ring protocol has exceeded
one second. This indicates a potential problem.
Non-Op-Dup The ring failed to complete the claim/beacon process because a
duplicate FDDI address has been detected.
Ring-Op-Dup The ring is operational, but a duplicate FDDI address has been
detected.
Directed The claim/beacon process did not complete within nine seconds. The
concentrator is now sending directed beacons to indicate a problem.
Trace A problem has been detected with the station or its upstream
neighbor. A trace is being sent to notify the upstream neighbor of the
problem. The concentrator and all stations between the concentrator
and its upstream neighbor can perform self-tests.
Table 15: SMT MAC Configurations
SMT MAC ConfigurationsSMT MAC Configurations
SMT MAC Configurations
Ring States Description
Isolated The path is not inserted into any path.