Specifications

Configuration Views Port Configuration - CSIIfPort View
Device Management Page 44 SmartSwitch 2000
Phy Address
Displays the physical (MAC) address of the
interface or port.
Max Frame Size
Displays the maximum frame size for the
interface or port.
Oper Status
Displays the current operational state of this
interface or port (Up, Down, or Testing).
Port Configuration - CSIIfPort
View
This view provides information on the
configuration and operating status of the device
interfaces or ports.
To access the Port Configuration - CSIIfPort view
for a particular interface or port, do the following:
1 Within the Interface Device view, highlight the
Interface icon.
2 From the View menu, select Icon Subviews ->
Icon Subviews -> Icon Subviews ->
Icon Subviews ->
Configuration
ConfigurationConfiguration
Configuration.
This view provides the following information:
XNSoverIP Xerox Network Service Protocol over IP
SLIP Generic Serial Line IP
ULTRA ULTRA Technologies
T-3 T3 link
SMDS Switched Multimegabit Data Service
FrameRelay T1 Frame relay
Table 13: Interface Types (Continued)
Interface Types (Continued)Interface Types (Continued)
Interface Types (Continued)
Type Description