Specifications

Device Views
Device Management Page 37 SmartSwitch 2000
Interface Icon Subviews Menu
This menu’s Configuration option opens the
Configuration dialog box, which allows you to
enable or disable the selected port. For
information on accessing device-specific
subviews, see the Introduction.
FDDI Label
This label provides access to the FDDI Icon
Subviews menu. (Refer to Figure 10.) Double-click
this label to open the FDDI Application views
described in the Operator’s Reference.
FDDI Icon Subviews Menu
Table 11 describes each of the Icon Subviews
menu selections available for FDDI. For
Orange BLK Bridge port is in the blocking mode.
Red BRK Bridge port is broken.
Blue UNK The status is unknown.
Table 10: Interface Status for the Physical (MIB II) Application
Interface Status for the Physical (MIB II) ApplicationInterface Status for the Physical (MIB II) Application
Interface Status for the Physical (MIB II) Application
Color Status Description
Green ON Port is operational.
Blue OFF Port is off.
Yellow TST Port is in the test mode.
Table 9: Interface Status for the Bridging Application
Interface Status for the Bridging ApplicationInterface Status for the Bridging Application
Interface Status for the Bridging Application
Color Status Description