Specifications

Device Views
Device Management Page 27 SmartSwitch 2000
highlighted icon. Double-click a non-text area of
this panel to open the Gauge Control Panel view
described later in this chapter. The Interface
Options panel provides the information described
below.
Filter
This menu button allows you to select the
application to be displayed by the Interface icons.
You can select other applications such as IP
routing if the SPECTRUM Routing Services
Management Module is loaded. For more
information, refer to the Routing Services
Management Module Guide.
Network Information
This menu button allows you to select the type of
information displayed in the Network Information
label of the highlighted icon. Possible selections
are ADDRESS, NAME, or MASK.
Interface Description
This field provides a description of the highlighted
interface. If no interface is highlighted, this field
is empty or shows the interface previously
highlighted.
Gauge Control Panel
This view (Figure 8) allows you to change the type
of statistical information displayed on the Gauge
label of the Interface icon. To access the Gauge
Control Panel view, double-click the background
of the Interface Options panel, or do the following:
1 Highlight the Interface Options panel.
2 From the View menu, select Icon Subviews ->
Icon Subviews -> Icon Subviews ->
Icon Subviews ->
Gauge Control Panel
Gauge Control PanelGauge Control Panel
Gauge Control Panel.