Specifications

Device Views
Device Management Page 26 SmartSwitch 2000
MAC Address Label
This label displays the MAC address of the device
interface. Double-click this label to open the CSI
Interface Port Model Information View display
described in the Operator’s Reference.
Network Information Label
This label displays user-selectable network
information (Address, Name, or Mask). The
default is Address.
To change this label’s display, use the Interface
Options panel described later in this chapter, or
do the following:
1 Double-click the label to open the Network
Information Panel dialog box.
2 Click the network information entry you wish
to display.
3 Click OK
OKOK
OK.
Gauge Label
This label displays the performance statistic
determined by the Gauge Control Panel for this
interface. (Refer to the Gauge Control Panel
description for more information.) Double-click
this label to open the Performance - CSIIfPort
view described in the Operator’s Reference.
Interface Options Panel
This area of the Interface Device view (Figure 6)
allows you to modify the presentation of a
XNSoverIP Xerox Network Service Protocol over IP
SLIP Generic Serial Line IP
ULTRA ULTRA Technologies
T-3 T3 link
SMDS Switched Multimegabit Data Service
FrameRelay T1 Frame relay
Table 4: Interface Types (Continued)
Interface Types (Continued)Interface Types (Continued)
Interface Types (Continued)
Type Description