Specifications

Application Views 802_1Q_VLAN Application
Device Management Page 24 SmartSwitch 2000
802_1Q_VLAN Application
Access: From the Icon Subviews menu for the
802_1Q_VLAN Application view, select VLAN Table.
Double-clicking on any entry in this table
displays the VLAN Table Details View (Page 24)
described later in this section.
This view provides the following information.
VID
VLAN identification number.
VLAN Name
Name of the selected VLAN.
VLAN Status
Status of the selected VLAN.
VLAN Table Details View
Access: Double-click any entry in the VLAN Table view.
This view allows you to edit information for the
VLAN Application.
You may edit the following information.
VLAN VID
This field is not writable and provides the VLAN
identification number.
VLAN Name
You may change the name of this VLAN to
anything you desire.
VLAN Status
You can either enable or disable this VLAN.
Interface Remap Application
Access: From the Icon Subviews menu for the
CtIfRemapApp icon, select Port Remap.
The name of the model type used to model the
application is CtIfRemapApp. The application
provides the ability to map one or more interfaces
to another interface. A map is defined by creating
a row in the Interface Remap Table (described
below) to specify the source and destination
interfaces. When a source interface is remapped
to a destination interface, the destination
interface transmits all packets received or
transmitted on the source interface. Counters on
the destination interface increment for all packets
transmitted by normal bridging or due to the
interface remap.
The Interface Remap Table provides the following
information.