Specifications

Device Views Interface Icon
Device Management Page 13 SmartSwitch 2000
Physical Address Label
This label displays the physical (MAC) address of
the device interface. Double-click this label to
open the CSI Interface Port Model Information
View display described in the SPECTRUM Views.
Network Type Label
This label displays user-selectable network
information (Address, Name, or Mask). The
default is Address.
To change this label’s display, use the Interface
Options panel described later in this chapter, or
do the following:
1 Double-click the label to open the Network
Information Panel dialog box.
2 Click the network information entry you wish
to display.
3 Click OK.
IP Address Label
This label displays the IP address for the
interface. Double-click the label to open the
Secondary Address Panel, which allows you to
change the address and mask for this interface.
PPP Point to Point Protocol
SFTWARLPBK Software Loopback
CLNPoverIP Connectionless Network
Protocol over IP
Enet3MB Ethernet 3 Mbps
XNSoverIP Xerox Network Service
Protocol over IP
SLIP Generic Serial Line IP
ULTRA ULTRA Technologies
T-3 T3 link
SMDS Switched Multimegabit
Data Service
FrameRelay T1 Frame relay
802.1Q 802.1 Q VLAN
Encapsulation
Table 3: Interface Types (Continued)
Type Description