User`s guide

Chapter 3: LANVIEW LEDs
3-2 VHSIM-G6 User’s Guide
3.2 REDUNDANCY
The VHSIM-G6 supports two modes of operation with the Gigabit
interfaces. Both the interfaces can be active, or one can be active and the
other redundant. When both interfaces are active, all led descriptions will
apply to both ports.
In the redundancy mode, only one of the two ports on the VHSIM-G6 is
active at one time. The port with link status showing (either a green LED,
solid or blinking, or an amber LED) is the active port. If both ports show a
link, GPIM 1 is the active port. The default port for the primary port link
is GPIM 1.
Table 3-1 VHSIM-G6 LED Functionality
LED Color Definition
Transmit
Green (Flashing) Activity, port enabled.
Amber (Blinking) Port in standby.
Off No activity, port enabled.
Red (Flashing) Transmit fault.
Red Diagnostic failure.
Receive
Green (Solid) Link, no activity. Port enabled.
Green (Blinking) Link, port disabled.
Amber (Flashing) Link, activity. Port enabled.
Off
No link, no activity. Port enabled or
disabled.
Red Diagnostic failure.