User`s guide

GPIM-01 and GPIM-09 Network Connections
VHSIM-G6 User’s Guide 2-11
2. Insert one end of the SC connector, key side down, into the GPIM-01
or GPIM-09 in the VHSIM-G6. See Figure 2-7. Ensure that the
appropriate cable is used for the application of the GPIM. Refer to
Appendix B for the appropriate GPIM for the fiber cable used for the
installation.
Figure 2-7 Fiber GPIM Connections
NOTE
Leave the protective covers in place when the connectors or
ports are not in use to prevent contamination.
Do not touch the ends of the fiber optic strands, and do not let
the ends come in contact with dust, dirt, or other contaminants.
Contamination of the ends causes problems in data
transmission.
If the ends become contaminated, blow the surfaces clean with
a canned duster. A fiber port cleaning swab saturated with
optical-grade isopropyl alcohol may also be used to clean the
ends.
SC Connector
GPIM-01 or GPIM-09
SC_GBIC
Key Latch (bottom of SC Connector)
VHSIM-G6
GPIM 1 GPIM 2
SP
(bottom view)
keys
SC Connector