User`s guide

Chapter 2: Installation
2-4 VHSIM-G6 User’s Guide
6. Refer to Figure 2-2 and position the VHSIM-G6 behind the module
faceplate, above the connectors.
Figure 2-2 Installing the VHSIM-G6 in the Host Device
7. Align the VHSIM-G6 connectors with the VHSIM connectors on the
module.
8. Press down firmly on the VHSIM-G6 until the connectors slide all the
way onto the pins. Ensure that the standoffs on the interface module
align with the standoff screw holes on the VHSIM-G6.
!
CAUTION
When installing the VHSIM-G6, ensure that the pins on the
module align with the connector to prevent bending the pins.
This can damage both the VHSIM-G6 and the module.
Faceplate Mounting Screws
2549_36
Standoff
Connectors
VHSIM-G6
Standoff Screws
Connectors
(top view)
Standoff
Connectors
Cutaway view of connectors
Host Platform
VHSIM-G6
GPIM 1 GPIM 2
SP