User`s guide

20 SmartSTACK ELS100-24 Firmware Revision 2.01 9033194
The Power Up Diagnostics and Web Management Enable features in the
user interface were available prior to Cabletron SmartSTACK ELS100-24
firmware revision 2.01, but were not documented in the Installation and
User Guide. These features are documented in the following two sections.
A.9 Power Up Diagnostics
The Power Up Diagnostics feature allows you to enable or disable
diagnostics software to be run every time the switch is initialized. The
diagnostics software tests switch components to determine if the switch
is fully operational before completing boot up.
1.
Select System Configuration menu from the Main Menu of the user
interface.
2.
Select Power Up Diagnostics to toggle between enable (Yes) and
disable (No).
A.10 Web Management Enable
The Web Management Enable feature allows you to enable or disable the
capability to configure and manage the switch over the web.
1.
Select System Configuration menu from the Main Menu of the user
interface.
2.
Select Web Management Enable to toggle between enable (Yes)
and disable (No).