User`s guide

16 SmartSTACK ELS100-24 Firmware Revision 2.01 9033194
Figure A-14. Syslog Server IP Address
4.
Select Lowest Syslog Severity Level. Eight different severity level
options are available by selecting
o
until the desired setting appears.
Table A-4 describes each of these severity levels and conditions. The
higher the severity, the lower the number.
SYSTEM CONFIGURATION Access Control: READ/WRITE
a. SNMP Configuration Menu
b. System Name
c. System Location
d. System Contact
e. IP Address 000.000.000.000
f. Subnet Mask 000.000.000.000
g. Default Gateway 000.000.000.000
h. BootP/DHCP Enable Yes
i. Screen Timeout (minutes) 0
j. READ/WRITE Password
k. READ ONLY Password
l. Terminal Baud Rate 9600
m. Power Up Diagnostics Yes
n. Syslog Server IP Address 024.001.133.111
o. Lowest Syslog Severity Level warning
p. Web Management Enable Yes
x. Previous Menu
Enter Selection: