User`s guide

9033194 SmartSTACK ELS100-24 Firmware Revision 2.01 13
7.
To modify an existing trunk group, first choose the trunk to modify by
selecting the radio button next to the appropriate trunk on the
Trunking Table Configuration menu (Figure A-9). Then select Modify
Trunk. Figure A-11 shows the Modify Trunk menu.
Figure A-11. Modify Trunk Menu
A.4 Half Duplex Support on 100Base-FX Ports
Half duplex support on 100Base-FX ports of the ELS100-24TXM has
been added in firmware revision 2.01. Previously, only full duplex
operation was supported on 100Base-FX ports. Figure A-12 shows the
Port Configuration menu and the Full Duplex option.
Figure A-12. Port Configuration Menu
Half Duplex operation is enabled when you set Full Duplex
to No.
PORT 1 CONFIGURATION Access Control: READ/WRITE
a. Port Name Val d’Or
b. Port Enable Yes
c. Flow Control Enable Yes
d. Full Duplex No
e. Port Speed 100
x. Previous Menu
Enter Selection: