User`s guide

6 SmartSTACK ELS100-24 Firmware Revision 2.01 9033194
Table A-1 describes fields and options available in the Trunking
Configuration menu.
Table A-1. Trunking Configuration Menu Description
3.
Select
c
from the Trunking Configuration menu to configure trunking.
The following message appears:
Enter Trunk Number (1-6):
4.
Enter a trunk group number. In this example, enter the number
1
.
Press [Enter].
Figure A-4 shows the Trunk Configuration menu with trunk group number
1.
Figure A-4. Trunk Configuration Menu
Fields/Options Description
Trunking Enabled Indicates whether trunking is enabled (Yes) or disabled
(No).
Trunking Protocol Indicates whether trunking protocols are enabled (Yes)
or disabled (No).
ID Lists the trunk group ID number.
Name Lists the trunk group name (1-14 characters).
Ports inTrunk Lists the ports in the trunk group.
Configure Option that allows you to create a new, or configure an
existing, trunk group.
Delete Option that allows you to delete an existing trunk
group.
TRUNK 1 CONFIGURATION Access Control: READ/WRITE
Name
Trunk Status CONNECTED
Trunking Protocol No
PORT ENABLED LINK STATUS
---------------------------------------------------------------------------------------------
a. Add Port(s) b. Remove Port(s) c. Trunk Name
d. Protocol Enable x. Previous Menu
c. Configure d. Delete x. Previous Menu
Enter Selection: