Specifications

9030751 E7 Event and Alarm Messages
4-11
MRXI-22/24 Events and Alarms
CsEvFormat/Event000d1101
{d "%w- %d %m-, %Y - %T"} AC Utility
Line Failure. The AC power to the UPS
monitored by {m} ({t}) is offline. (event
[{e}])
CsPCause/Prob000d1101
The UPS is now operating on battery
backup and the utility voltage is not
within a safe-operating range for your
equipment.
CsEvFormat/Event000d1102
{d "%w- %d %m-, %Y - %T"} AC Utility
Line Recovery. The AC power to the UPS
monitored by {m} ({t}) is back online.
(event [{e}])
CsPCause/Prob000d1102
AC Power has been restored to the UPS.
The UPS is now operating normally and
that power is present at the outlets.
CsEvFormat/Event000d1103
{d "%w- %d %m-, %Y - %T"} Low Battery
Condition. The battery in the UPS
monitored by {m} ({t}) is in a low
condition. (event [{e}])
CsPCause/Prob000d1103
Power loss.
CsEvFormat/Event000d1104
{d "%w- %d %m-, %Y - %T"} Low Battery
Recovery. The battery in the UPS
monitored by {m} ({t}) has re-charged its
battery above the low-battery point.
(event [{e}])
CsPCause/Prob000d1104
Power has been restored.
CsEvFormat/Event000d1105
{d "%w- %d %m-, %Y - %T"} Abnormal
Condition. The UPS monitored by {m} ({t})
has entered an abnormal condition, such
as an overload or trip on low battery.
(event [{e}])
CsPCause/Prob000d1105
1) Overload Condition: Too many devices
are plugged into the UPS. 2) UPS Initial
Power Up 3) Trip on Low Battery: The
UPS has lost AC Power and the Battery is
at a Low Condition.
CsEvFormat/Event000d1106
{d "%w- %d %m-, %Y - %T"} Abnormal
Condition Recovery. The UPS monitored
by {m} ({t}) has recovered from an
abnormal condition. (event [{e}])
CsPCause/Prob000d1106
1) Power has been restored. 2) Load has
stabilized to within specifications.
CsEvFormat/Event000d1107
{d "%w- %d %m-, %Y - %T"} UPS Shutting
Down. The UPS monitored by {m} ({t}) has
been ordered to shut itself, or the load, off
over the serial line. (event [{e}])
CsPCause/Prob000d1107
1) Discharged Battery: Battery
discharged due to an extended power
outage. 2) Overload Condition: An
overload condition has been detected
while the UPS was operating on battery.
Table 4-1. MRXI-22/24 Events and Alarms (Continued)