Specifications

9030751 E7 Event and Alarm Messages
4-5
MRXI-22/24 Events and Alarms
CsEvFormat/Event000d0115
{d "%w- %d %m-, %Y - %T"} Port Topology
type changed. Port {I 3} of module in slot
{I 1} has changed from {T PrtTopoStatus
5} port on {m} ({t}). (event [{e}])
CsPCause/Prob000d0115
The number of addresses in the source
address table has changed. If three or
more addresses are learned on a port for
one aging time period, the port is
designated as a trunk port. A port
connecting two hubs or a coax segment
with multiple taps are examples of trunk
ports. If a port has one address in the
source address table for one aging time,
the port is designated as a station port.
An example of a station port would be a
twisted pair "home run" to a PC.
CsEvFormat/Event000d0117
{d "%w- %d %m-, %Y - %T"} Port security
violation has occurred, MAC address {X 5}
has been detected on port {I 3} of module
in slot {I 1} of {m} ({t}). (event [{e}])
CsPCause/Prob000d0117
This event is only generated when the
hub has port locking enabled. When a hub
is locked, the source MAC addresses are
learned on each port. When a port detects
an attached device has changed its
address, the device will note that the new
address is not in the source address table.
This will disable and lock the port, which
then transmits this trap. This trap would
be generated if an adapter were replaced
or if an intruder attempted to access the
network.
CsEvFormat/Event000d0118
{d "%w- %d %m-, %Y - %T"} Port violation
reset, port {I 3} of module in slot {I 1} of
{m} ({t}). (event [{e}])
CsPCause/Prob000d0118
The network administrator has located
the offending device that caused the port
violation, and has re-enabled the port for
use by the original network address for
that port.
CsEvFormat/Event000d0119
{d "%w- %d %m-, %Y - %T"} Environment
Temperature Warm condition for module
in slot {I 1} reported by {m} ({t}). (event
[{e}])
CsPCause/Prob000d0119
1) A module may be defective. 2) A fan has
failed in the chassis.
CsEvFormat/Event000d011a
{d "%w- %d %m-, %Y - %T"} Environment
Temperature Hot condition for module in
slot {I 1} reported by {m} ({t}). (event [{e}])
CsPCause/Prob000d011a
1) A module may be defective. 2) A fan has
failed in the chassis.
Table 4-1. MRXI-22/24 Events and Alarms (Continued)