Specifications

Source Addressing
Configuration Views MRXI-22/24
3-12 Management Module Guide
Source Addressing
Source Address Tables are used to determine which frames will be forwarded
from one network segment to another. This section provides a description of
the source addressing views used to establish a source address table for the
MRXI-22/24.
Module Source Address Table View
To access the Module Source Address Table view do the following:
1. Highlight the MRXI-22/24 Device Icon.
2. From the Icon Subviews menu, select Module Source Address Table.
This view provides the following information:
Source Address
The addresses of the source devices sending packets received by the MRXI-22/
24 module over any port.
Port ID
The number identifying the port over which the module received the packet
from the corresponding source address.
Board ID
The number identifying the MRXI-22/24 module. This value will always be 1.
Source Address Board/Port Location View
To access the Source Address Board/Port Location view do the following:
1. Highlight the MRXI-22/24 Device Icon.
2. From the Icon Subviews menu, select Find Source Address.
This view provides the following information:
Model Name
The network name of the MRXI-22/24 being modeled.
Network Address
The IP address of the MRXI-22/24 being modeled.
Source Address
Enter the desired ethernet address here, using the File/Update feature.