Specifications

9030751 E7 Configuration Views
3-11
Module and Port Configuration Views
Collision Threshold
Displays the threshold number of collisions per good packet, within the alarm
timebase, that will generate a collision alarm. You can modify this value.
Allows you to disable the module or port if the collision alarm conditions
described above are met and an alarm for the module or port is generated.
This is useful in preventing excessive network traffic from alarm messages
transmitted by the module, and allows for module or port troubleshooting.
Allows you to configure whether broadcast alarms are disabled or enabled.
Broadcast Threshold
Displays the threshold number of broadcasts received, within the alarm
timebase, that will generate a broadcast alarm. You can modify this value.
Allows you to disable the module or port if the broadcast alarm conditions
described above are met, and an alarm for the module or port is generated.
This is useful in preventing excessive network traffic from alarm messages
transmitted by the module, and allows for module or port troubleshooting.
Allows you to configure whether error alarms are disabled or enabled.
Error Threshold
Displays the percentage of errors per good packet, within the alarm timebase,
that will generate an error alarm. You can modify this value.
Allows you to disable the module or port if the error alarm conditions
described above are met and an alarm for the module or port is generated.
This is useful in preventing excessive network traffic from alarm messages
transmitted by the module, and allows for module or port troubleshooting.
Error Source
This view is the same as that described under Error Source in the section on
Repeater Configuration View.
Collision Alarm Condition
Broadcast Alarms
Broadcast Alarm Condition
Error Alarms
Error Alarm Condition