Specifications

Module and Port Configuration Views
Trap Configuration
Configuration Views MRXI-22/24
3-10 Management Module Guide
Trap Configuration
This area of the Module or Port Configuration View allows you to enable or
disable any of the following types of traps:
Allows you to Enable Link Trap generation, such that all packets indicating a
change in link status are reported within the trap database.
Allows you to Enable Segmentation Trap generation, such that all packets
indicating a change in segmentation status are reported within the trap
database.
Allows you to Enable Source Address Trap generation, such that all packets
indicating a change in source address are reported within the trap database.
Alarm Configuration
This area of the Module or Port Configuration view provides the following
configuration and status information for generating alarms for the selected
module or port:
Allows you to configure whether traffic alarms are disabled or enabled.
Traffic Threshold
Displays the threshold number of packets, within the alarm timebase, that
will generate a traffic alarm. You can modify this value.
Allows you to disable the module or port if the traffic alarm conditions
described above are met and an alarm for the module is generated. This is
useful in preventing excessive network traffic from alarm messages
transmitted by the module, and allows for module troubleshooting.
Allows you to configure whether collision alarms are disabled or enabled.
Link Traps
Segmentation Traps
Source Address Traps
Traffic Alarms
Traffic Alarm Condition
Collision Alarms