User guide

Router Configuration

Configuration Steps

Overview

If you have collected the required information as described in the preceding

section, you are ready to configure the router.

Using Configuration Manager, you will perform the following basic

configuration steps:

1. Connect, Select the Router to configure, and log into the target

router.

2. System Settings

Configure the target router’s system settings including:

• System Name

• System Message (optional)

• Dial Authentication Password

• Ethernet IP Address and LAN RIP Settings

• DHCP Settings

• If configuring IPX: Ethernet IPX Network #

• Change Login Password (optional)

3. ISDN Settings

Configure the target router’s ISDN Settings including:

• ISDN Switch Settings: SPIDs, DNs, Switch type

• Analog Phone Settings (for POTS routers)

4. Remote Routers

Add Remote Routers to the remote router database and configure the

following remote router information:

• ISDN Dial Settings: Caller ID, Call Back information, Bandwidth

management controls

• Security information

• Bridging capability