User guide

Installing Router Hardware

1. Connect the router to the Ethernet LAN

2. Connect the router to an ISDN line

3. Connect phone, fax, or analog modem device to POTS interfaces

4. Connect the router to an AC power source

Note 1: Non-Windows users will have to additionally connect the router

console port to their computers to be able to initialize the router’s IP address

and configure the router. Refer to Appendix D, Access the Command Line

Interface (CLI) for more details.

Note 2: The Console interface is not used.

The following diagram shows the back panel the CSX105 router and the

location of jacks for connecting the ISDN equipment, analog device

equipment, and the Ethernet hub.