User guide

ISDN Router
110
86 Call having the requested call identity has been cleared
88 Incompatible destination
91 Invalid transit network selection
95 Invalid message, unspecified
96 Mandatory information element is missing
97 Message type non-existent or not implemented
98 Message not compatible with call state or message type non-
existent or not implemented
99 Information element non-existent or not implemented
100 Invalid information element contents
101 Message not compatible with call state
102 Recovery on timer expiration
111 Protocol error, unspecified
127 Internetworking, unspecified
History Log
The History Log utility is a troubleshooting tool which displays the router’s
activity. It can be accessed from a terminal emulation session (including
Configuration Manager) or from Telnet.
1. If accessing the logging utility through Telnet, click Connect from the
menu, Remote System, and enter the router’s IP address. Click Connect.
If accessing the logging utility through Configuration Manager, select
Tools and Terminal Window (the console cable is required).
2. Log in with your administration password into the router (e.g. “admin”).
3. Use the command system history to view the buffer contents.
Other logging commands:
• If you wish to monitor your router activity at all time, enter the command
system log start to view a continuous log, if you are using Telnet.
(This command will not work in a Terminal Window session, but only
from Telnet.)
• The command system log status is used to find out if other users,
including yourself, are using this utility.
• To discontinue the log at the console, use the command system log
stop.
When you exit Telnet, you automatically stop any logging programs running
in that session.