Specifications

Configuration Views Repeater Configuration View
Device Management Page 52 SmartSwitch 6000/Matrix E6
Repeater Management
This area of the Repeater Configuration view
provides the port information described below.
Port Count
The total number of ports on this LAN segment.
Ports On
The total number of ports currently in the ON
state on this network.
Ports Operational
The number of operational ports on this network.
Network Ports
Allows you to enable the network ports on this
network segment. Possible states are: NoEnable
and Enable.
Trap Configuration
This area of the Repeater Configuration view
allows you to enable or disable the following
traps.
Link Traps
Allows all packets indicating a change in link
status to be reported within the trap database.
Possible menu selections are: Disable, Enable,
and Other.
Segmentation Traps
Allows all packets indicating a change in
segmentation status to be reported within the
trap database. Possible menu selections are:
Disable, Enable, and Other.
Alarm Configuration
This area of the Repeater Configuration view
provides configuration information on generating
alarms for the selected module. This area
contains the fields described below.
Timebase
The user defined time interval, in seconds, for the
Traffic Threshold. The lowest allowable value is
10.
Traffic Alarms
Allows you to enable or disable detection of Traffic
Alarms.
Traffic Threshold
The threshold value for the number of packets
that can be transmitted during the Timebase
before generating a traffic alarm. This field is
user-configurable from 1 to 4 billion.
Collision Alarms
Allows you to enable or disable detection of
Collision Alarms.