Specifications

Configuration Views FDDI MAC Device Configuration View
Device Management Page 48 SmartSwitch 6000/Matrix E6
FDDI MAC Device
Configuration View
Access: From the Icon Subviews menu for the Chassis
Device views, select FDDI Configuration.
This view provides information on the
configuration and operating status of the
concentrator. The view is divided into two areas,
Station Configuration and SMT Information.
Station Configuration
This area of the FddiMAC Device Configuration
view provides information specific to the FDDI
station.
Ring State
The current state of the FDDI ring. Table 21 lists
the possible states and their descriptions.
MAC Configuration
The actual configuration of the station. Table 22
(Page 49) lists the possible configuration states and
their descriptions.
Current MAC Path
The ring that this station resides on. Possible
values are: Primary, Secondary, Local, or
Isolated.
MAC Address
The MAC (physical) address of this station.
MAC Count
The number of MACs supported by this station.
Non Master Ports
The number of non-master ports on this station.
Master Ports
The number of master ports on this station.
Table 21: FDDI Ring Stats
Ring State Description
Isolated The concentrator is not attached to the
ring.
Non-Op The concentrator is attempting to enter the
ring.
Ring-Op The ring is operational.
Detect The claim/beacon process of the FDDI ring
protocol has exceeded one second. This
indicates a potential problem.
Non-Op-Dup The ring failed to complete the
claim/beacon process because a duplicate
FDDI address has been detected.