Specifications

Configuration Views Device Configuration View
Device Management Page 47 SmartSwitch 6000/Matrix E6
Device Configuration View
Access: From the Icon Subviews menu of the
SmartSwitch 6000 Device icon, select Configuration.
This view (Figure 14 on Page 46) provides status
and configuration information about the device as
a whole as well as on a port-by-port basis. Fields
and Column headings with the Device
Configuration view and its subviews are explained
in further detail in the SPECTRUM Views
documentation.
Contact Status
Indicates whether a connection has been
established with the module.
This button updates the interfaces displayed in
SPECTRUM to reflect any changes.
Refer to the SPECTRUM Views documentation.
Interface Configuration Table
This section of the Device Configuration views
provides the following information:
Number of Interfaces
The number of interfaces available from the
module.
Index
The numerical value identifying the port.
Type
The type of hardware interface for the port.
Phy Address
The MAC address of the port.
Max Frame Size
The maximum frame size for the module.
Oper Status
The current operational state of the port.
Reconfigure Interfaces
Interface Address Translation