Specifications
Applications View ATM Client Application
Device Management Page 41 SmartSwitch 6000/Matrix E6
3 Set the path information for the row you wish
to create, change, or remove.
4 Press Return and click OK.
5 To create or change a row, click the Create
button, change the applicable fields in the
Change view and click the right mouse
button. Click OK.
6 Click the Validate Row button and return to
the application table view to see the change.
7 To remove a row, highlight it, click the
Remove button, and then the Update button.
The row will then be removed from the table view.
Double-clicking a field entry opens the interface-
specific ATM Switch Application Virtual Channel
Link view, which is described below.
Virtual Channel Link View
Access: From the Icon Subviews of the ATM Application
icon, select Virtual Channel Link.
Interface
The interface index for this VPI and VCI.
VPI (Virtual Path Identifier)
The VPI value of the VCL. The maximum VPI
value cannot exceed the value allowable by the
Interface MaxVPI Bits.
VCI (Virtual Channel Identifier)
The VCI value of the VCL. The maximum VCI
value cannot exceed the value allowable by the
Interface MaxVCI Bits.
Admin Status
Implemented only for a VCL that terminates a
VCC (i.e., one that is not cross-connected to other
VCLs). Its value (Up or Down) specifies the desired
administrative state of the VCL, i.e., whether
traffic flow is enabled and disabled for this VCL.
Oper Status
The current operational status of the VCL. Up and
Down indicate that the VCL is operational or not
operational, respectively. Unknown indicates that
the status of this VCL cannot be determined.
Row Status
Used to create, delete or modify a row in this
table. To create a new VCL, this field is initially
set to createAndWait or createAndGo. This field
must not be set to active unless the following
columnar fields exist in this row:
• RTD Index
• XTD Index
• AAL Type (if the local VCL endpoint is also the
VCC endpoint)
• Transmit Size (for AAL5 connections only)
• Receive Size (for AAL5 connections only)