Specifications

Applications View ATM Client Application
Device Management Page 39 SmartSwitch 6000/Matrix E6
ATM Client Application VCL Table
Access: From the Icon Subviews menu for the ATM Client
Application icon, select VCL Table.
This view contains the following information:
Admin Status
Implemented only for a VCL that terminates a
VCC (i.e., one that is not cross-connected to other
VCLs). Its value (Up or Down) specifies the
desired administrative state of the VCL, i.e.,
whether traffic flow is enabled or disabled.
Oper Status
Indicates the current operational status of the
VCL. Up and Down indicate whether the VCL is
operational. Unknown indicates that the status of
this VCL cannot be determined.
Last Change
The value of sysUpTime at the time this VCL
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the agent, then this field contains
a zero value.
RTD (Receive Traffic Description) Index
The value of this field identifies the row in the
ATM Traffic Descriptor Table that applies to the
receive direction of this VCL.
TTD (Transmit Traffic Description) Index
The row of the ATM Traffic Descriptor Table that
applies to the transmit direction of this VCL.
AAL (ATM Adaptation Layer) Type
An instance of this field only exists when the local
VCL endpoint is also the VCC endpoint and AAL
is in use. The field indicates the type of AAL used
on this VCC, which includes AAL1, AAL3/4, and
AAL5. The other type is a user-defined AAL type.
The unknown type indicates that the AAL type
cannot be determined.
Transmit Size
An instance of this field only exists when the local
VCL endpoint is also the VCC endpoint and AAL5
is in use. The field indicates the maximum AAL5
Table 19: ATM Client Application Icon
Subviews
Option Opens the...
Configuration Device Configuration View on Page 46
Model
Information
Model Information View described in
SPECTRUM Views.
VCL Table ATM Client Application VCL Table on
Page 39
Interfaces Interface Configuration view (see
SPECTRUM Views).