Specifications

Device Views Secondary Address Panel
Device Management Page 30 SmartSwitch 6000/Matrix E6
Module Identification Labels
These labels provide the following information
that identifies a specific device.
Slot Number
The module’s location in the chassis. Double-click
this area to open the Application view described
under Applications View on Page 33.
Model Type
The type of module in the chassis (for example
6E132-25). Double-click this area to open the
Model Information View on Page 54.
Model Name
A user-defined name; otherwise, it defaults to the
IP address. Double-click this area to open the
Device Configuration View on Page 46.
Backplane Connections Labels
These labels represent the interfaces between the
module and the FTM backplane. The device-
specific Icon Subviews menu selection for these
labels is Configuration, which opens a dialog box
that lets you enable or disable the selected port.
Note in Figure 14 that the Backplane Module icon
has a gray Backplane Connection label (b4),
which corresponds with interface four of the
chassis backplane.
Table 16 describes the possible operational states
of the backplane connections.
Table 16: Backplane Connection Status
Descriptions
Color Status Description
Green ON Operational
Yellow NLK Operational but not linked
Magenta Test Operational test
Blue Off Operationally and administratively
down
Red Off Operationally down but
administratively enabled
Gray UNK Unknown