Specifications

Device Views Secondary Address Panel
Device Management Page 27 SmartSwitch 6000/Matrix E6
Interface Type Label
This label displays the type of network interface
module (e.g., Ethernet, FDDI, etc.). Double-click
this label to access the Interface Configuration
Table on Page 47.
MAC Address Label
This label displays the physical address of the
network interface module and accesses the CSI
Port Model Information view described in
SPECTRUM Views.
IP Address Label
This label displays the IP address for the
interface. Double-click this label to open the
Secondary Address Panel (Page 27).
Interface Icon Subviews
Table 14 describes each of the Icon Subviews
menu selections available for the Interface icon.
Secondary Address Panel
Access: From the Icon Subviews menu for the Interface
icon in the Device view, select Secondary Address Panel.
This panel provides a table of IP addresses and
masks obtained from the Address Translation
table within the device’s firmware. You can
change the current address displayed in the IP
Address field by selecting an entry from the table
in this panel and clicking the Update button.
Table 13: Administrative Status Label
Color Status Description
Green FWD Bridge port is forwarding
Blue DIS Port is disabled
Magenta LST Bridge is in listening mode
Magenta LRN Bridge is in learning mode
Orange BLK Bridge port is in blocking mode
Red BRK Bridge port is broken
Table 14: Interface Icon Subviews
Menu Selection Opens the...
Configuration Interface Configuration view (see
SPECTRUM Views).
Secondary
Address Panel
Panel that provides the secondary
address and mask for the interface.
Protocols
(with HSIM only)
ATM Client Application on Page 38
Model Information Model Information View described in
SPECTRUM Views.