Specifications

Device Views Interface Icons
Device Management Page 26 SmartSwitch 6000/Matrix E6
Interface Icons
Figure 7 shows a close-up of an Interface icon
from the Device view. Most of the informational
labels on the icon also provide double-click access
to other views, as explained in the following label
descriptions.
Figure 7: Interface Icon
Interface Number Label
This label identifies this interface (”e” indicates an
Ethernet interface, “b” indicates a backplane
interface, and the numeral represents the
interface number on this module).
Administrative Label
This label displays the state of this port (On, Off,
Testing). Table 12 and Table 13 list the possible
states relative to the application selected. The
default application for this view is Physical (MIB-
II). Double-click this label to access the Interface
Configuration view. See the SPECTRUM Views
documentation.
c
b
1
ethernet
0:0:1D:F:FD:B6
a
a Interface Number Label
b Administrative Label
c Interface Type Label
d MAC Address Label
e IP Address Label
0.0.0.0
d
e
ON
Table 12: Physical Application
Administrative Status
Color Status Description
Green ON Port is operational
Blue OFF Port is off
Magenta TST Port is in the test mode