Specifications

Device Views Chassis Device View
Device Management Page 23 SmartSwitch 6000/Matrix E6
Repeater Port Display Form
This option on the Repeater label Icon Subviews
menu provides two choices: Admin and Link.
These choices determine which operational
condition is displayed on the associated Repeater
Port labels. For example, if you select Admin via
the E1 Repeater label, the Repeater Port labels
associated with E1 (i.e., Ports 1 through 12) will
display the administrative status.
Repeater Port Labels
The 6E123-50 and 6E133-49 modules have 10
Mb repeater ports while the 6H123-50 and
6H133-37 modules have the capability of
switching ports between 10 Mb and 100 Mb
repeaters. For example, a 6H133_37 model would
have three 100 Mb repeater models, but
depending on the configuration, it might have six
repeater models, three at 10 Mb and three at 100
Mb. The CsRipEnetRptr application is used for all
these modules for either 10 Mb or 100 Mb
support.
The Chassis Module Icon provides Repeater Port
labels, which allow you to perform repeater port
management. The views accessible from the
Repeater Port label Icon Subviews menu are listed
in Table 10.
Repeater Port Number
Shows an index number identifying a particular
repeater port.
Repeater Port Status
Indicates the port activity status.
The Repeater Port Frame & Error Breakdown view
and Repeater Port Frame Size & Protocols view
provide pie charts and tables that are similar to
what is described for the Repeater Frame & Error
Breakdown View on Page 21 and the Repeater
Frame Size & Protocols View on Page 22.
Table 10: Repeater Port Label Icon Subviews
Menu Selection Description
Port Notes Opens a note pad for your use.
Port Frame &
and Error
Breakdown
Opens the Repeater Port Frame & Error
Breakdown view.
Port Frame Size
& Protocols
Opens the Repeater Port Frame Size &
Protocols view.
Enable/Disable
Port
Opens a dialog box that lets you enable
or disable the port.