Specifications

Page 6 of 11
The front panel of your residential gateway provides LED status indicators that indicate how well and
at what state your residential gateway is operating.
1. POWER – ON, powers is applied to the wireless residential gateway.
2. DS – ON, the wireless residential gateway is receiving data from the cable network
3. US – On, the wireless residential gateway is sending data to the cable network
4. ONLINE – ON, the wireless residential gateway is registered on the network and fully
operational
5. ETHERNET 1 – 4 – ON, a device is connected to one of the Ethernet ports. BLINKING indicates
that data is being transferred over the Ethernet connection
6. WIRELESS LINK – ON, the Wireless Access Point is operational. BLINKING indicates that data is
being trasferred over the wireless connection. OFF indicates that the wireless access point has
been disabled by the user
7. WIRELESS SETUP – OFF (normal condition) wireless setup is not active. BLINKING indicates
the user has activated wireless setup to add new wireless clients on the wireless network
8. TEL1 – ON indicates telephone service is enabled. Blinks when line 1 is in use. OFF indicates
that phone service for TEL1 is not enabled
9. TEL2 – ON indicates telephone service is enabled. Blinks when line 2 is in use. OFF indicates
that phone service for TEL 2 is not enabled.
The front panel of your residential gateway provides LED status indicators that
indicate how well and at what state your residential gateway is operating.
1. POWER – ON, powers is applied to the wireless residential gateway.
2. DS – ON, the wireless residential gateway is receiving data from the cable
network
3. US – On, the wireless residential gateway is sending data to the cable
network
4. ONLINE – ON, the wireless residential gateway is registered on the network
and fully operational
5. ETHERNET 1 – 4 – ON, a device is connected to one of the Ethernet ports.
BLINKING indicates that data is being transferred over the Ethernet
connection
6. WIRELESS LINK – ON, the Wireless Access Point is operational. BLINKING
indicates that data is being trasferred over the wireless connection. OFF
indicates that the wireless access point has been disabled by the user
7. WIRELESS SETUP – OFF (normal condition) wireless setup is not active.
BLINKING indicates the user has activated wireless setup to add new
wireless clients on the wireless network
8. TEL1 – ON indicates telephone service is enabled. Blinks when line 1 is in
use. OFF indicates that phone service for TEL1 is not enabled
9. TEL2 – ON indicates telephone service is enabled. Blinks when line 2 is in
use. OFF indicates that phone service for TEL 2 is not enabled.
Front Panel Description