User guide

45
17.0 Advanced Tools
18.0 Interfaces For 3D
TrayMatic is a GSN Technology software product that supports the design of all cable raceway in a
3D format. The benefits of using TrayMatic includes savings in time in preparing drawings and saving
in time in preparing raceway data for CableMatic.
AT1) Cable termination data can be imported from a project’s
CM+ database
AT2) Uses the RENAMING table to rename components
(trays, cables, conduits, equipment) . Please remove data
from the Renaming table after it the process is completed.
AT3) Moves the entire model to a location specified by the
user.
AT4) For each conduit or drop out that has 'CALC' in either
the LENGTH or FROM_OFFSET field, this function will
attempt to compute the value(s). You may input the tray tag
in the FROM column or enter 'CALC' to find the closest tray
(within 200FT (approx 66 Meters) with the same service level
as the conduit/drop out.
AT5) Used to create cable, equipment and raceway tables
for exporting to Excel. These spreadsheets can be sent to
contractors and clients in their required formats.
AT6) Reads the TRAY_END_CONNECTIVITY table and
based on the data sets the From/To Point for trays in the
ACRS_RACEWAY_DATA table. It checks the con
sistency of
the data and if errors are reported, the data will not be
committed.
AT7) Imports the Raceway Data from TM. Performs data
consistency checks and aborts when data not consistent (tray
names, service levels, etc.). When successful, assigns trays
node names.