User guide

38
15.0 Audits, Calcs and Tools
Audits are reports (usually in spreadsheet format) that report problems such as:
A1) Creates a Tray End Connectivity List from Tray data in ACRS_RACEWAY_DATA table
A2) A cable route uses a raceway that is not in the raceway data table
A3) Cables segregation codes that are incompatible with the raceways that the cables are in
A4) Cable routes that do not link between raceways (an apparent gap)
A5) Reports all data for cable types plus includes the amt of cables using the cable type.
A6) Displays problem when cables of different start-up systems are routed in the same conduit.
A7) Reports cables that are routed in the same raceways at the start and end of the routes but diverge in the
middle of the route.
A8) Checks errors in cables routed in conduits with the wrong Work Package
A9) Checks errors in cables routed in conduits with the wrong Utilization Code
A10) Reports errors where the sum of tray separator widths exceed the tray width
A11) This function reports raceways and cables where the raceways in manual cable routes have lengths (in
Parenthesis) that are longer than the raceway length input to the raceway data table.
A12) Report optionally all or only cables with estimated length smaller than the route length.
A13) This function reports on cables that are IFC where the route is missing or where the route uses conduits
that are not IFC.
A14) This function compares IFC'd cables and conduits in the design database to the archive table and creates a
report of discrepancies in their data. Please read Discrepancy Report for IFC Components.pdf for more detail.
C1) Calculates the area of cable in Guide Conduits
C2) Lists cables contained and fill for a raceway. Fill can be obtained at any point on the raceway
C3) Resizes unlocked raceways and calculates % fill. Use this to refresh the data for spreadsheet queries. This
is handled automatically when batch routing and making an issue.
C4) Self explanatory.