User guide

33
14.0 Single Automatic and Manual Cable Routes
CM+ provides the ability to route one cable at a time so that it is easier to diagnose problems with
data. Use the Cable Data Form for this purpose. You may also use that form change cable and
equipment data.
14.1 Cable Data Form
The pull downs in the cable form work the same way as the pull downs in Wintab. For example, if
you are starting with a blank form and you select a specific cable type and then press the pull down
for cable tag, you will then be able to select a cable that use that cable type. If you don’t select a
cable and press the Search button, CM+ will retrieve all cables matching the cable type. You can then
use the left and right arrows to browse the cables. Using this form you can add a new cable, change
cable and equipment data and delete a cable.