User guide

12.0 Logistical Checks

It is very important to check data before attempting to route cables. The reports in this section are

designed to identify errors, inconsistencies and missing critical data.

ggh

12.1 Report A1 - Missing Critical Cable Type

This report examines the CableType table for the following errors:

•

Number of cable jackets not input

• Number of conductors not input

• Conductor Size not input or not defined in project data

• Diameter not input

• Override cable area not input And Ground Conductor=’Y’

• Permissible segregation codes not input

This data is used in connection with Report A3 (see below).

12.2 Report A2 - Missing or Invalid Cable Type in Cable Data

This report examines the Cable Data table and finds cables that do not have cable type input or if the

cable type is not input in the Cable Type table. In addition, this report, identifies cables that use cable

types which have are missing valid conductor size data. The report is used for a quick check for this

crucial data.