User guide

16
4.8 Raceway Catalog Data
This data is crucial for tray and conduit sizing. The raceway catalog number is either input to each
raceway or CableMatic Plus will calculate it. CableMatic chooses the smallest size that matches
the raceway type that is input for the raceway. The description (if entered) will be reported on the
Tray and Conduit reports.
Our TrayMatic program uses this data for generating conduit cross sections. If Material is not
entered, the word following the COND in Type (Raceway Type) for the material value. The conduit
size will be taken as the first word in the Cat Nmbr field. In the event the Cat Nmbr field does not
have an embedded blank, the size will be taken from the first word in the description field.
For tray width, input both the inside and outside widths. These widths will be used by TrayMatic, If
Conduit O.D. is not input, TrayMatic will deaw conduits using the inside diameter.