User guide

13
•
4.4.2 Voltage Classes
Voltage Classes are restricted to: <=2KV POWER, >2KV POWER, ANY MIXTURE and CONTR/SIGNAL.
4.5 Service Levels and Cable Segregation Rules
Raceway service levels and cable segregation codes are limited to two characters. Input a
comma delimited list of cable segregation codes that may be used for each service level. When
you enter raceway data, the raceway service level must be on of the values you input to this
table. You should use this data to control what cables may use a raceway. By careful planning
of this data, you can restrict the cables by tray or by conduit. In some design situations, even
though trays may share cables of different segregation codes, conduits may have a restriction to
only one segregation code. The tray fill reserve is used for tray sizing. Enter this value in per
cent. When conduit fill restrictions limit the maximum number of conductors per conduit, enter the