Cut Sheet

GENERATOR INSTALLATION COMPOSITE CABLE FOR
HOME STANDBY GENERATORS - COPPER 7-11KW
Component
Number
No.
Cond.
Gauge
AWG/MCM
No.
Strands
Nom. Cond. Insulaon Wall, Nom. Jacket Wall Nom. O.D., Nom. Net Weight
DCR Ω/M’ Inches mm Inches mm Inches mm lb./k. kg/km
Component 1
(Power)
3 8 19/.0295
“
0.65 0.037 0.94
0.062 1.57 0.669 16.99 360 535
Component 2
(Ground)
1 10 7/.0383
“
1.04 0.026 0.66
Component 3
(Control)
6 18 16/30 6.40 0.021 0.53
Note: All dimensions & weights are nominal subject to industry standards and tolerances unless otherwise noted.
COMPONENT 1 (POWER)
3-CONDUCTOR
Conductor: 8 AWG 19/.0295
“
Bare Copper
Diameter: 0.222
“
Insulaon: PVC/Nylon
Nom Wall: 0.037
“
Color Code: Black, White, Red
COMPONENT 2 (GROUND)
1-CONDUCTOR
Conductor: 10 AWG 7/.0383
“
Bare Copper
Diameter: 0.165
“
Insulaon: PVC/Nylon
Nom Wall: 0.026
“
Color Code: Green
COMPONENT 3 (CONTROL)
6-CONDUCTOR
Conductor: 18 AWG 16/30
Bare Copper
Diameter: 0.086
“
Insulaon: PVC/Nylon
Nom Wall: 0.021
“
Color Code: Black, Red Yellow,
Yellow/Black, White, Blue
CONSTRUCTION PARAMETERS:
CABLING
Lay Length: 7.68
“
Core Wrap: Clear Mylar
JACKETING
Outer Jacket: PVC Nom Wall: 0.062
“
Nom Diameter: 0.669
“
Jacket Color: BLACK
Legend Type: Ink Jet
POWER & CONTROL TRAY CABLE 8 AWG (8.36mm2) 3/C & 10 AWG
(5.26mm2) 1/GRND & 18 AWG (.82mm2) 6/C TC-ER-JP E75755 (UL) 600V
90C DRY/75C WET OIL RES I SUNLIGHT RESISTANT DIRECT BURIAL --
GENERAC P/N CRLHSB-07-11
Sequenal Marking: Connuous
Physical Properes
Temperature Range: 90°C Dry/75°C Wet
Electrical Properes
Voltage Rang: 600V RMS
Industry Approvals:
UL: TC-ER-JP
UL: Vercle Flame Standard: 1685
UL Standard: 1277
NEC/NFPA 2020
Features:
Oil Resistant: Oil Res I
Sunlight Resistant: Yes
Direct Burial: Yes
Water Resistant: Yes
Joist Pull: Yes
Compliance:
RoHS: Complies with Direcve
(EU) Dir. 2015/863 – (RoHS 3)
1600 W. Cornell St. Milwaukee, WI 53209 | | cablemasterpowercords.com | | 414.292.2180
Rev Date: 09.22.2020
CM-HSBCC-07-11KW — 8/3 + 10/1 + 18/6 TC-ER-JP 600 V BLACK
PRODUCT SPECIFICATION SHEET
Complies with EU Dir. 2015/863 – (RoHS 3)
The customer will accept all factory lengths and +/- 10 percent of total order requested.